Timing Controlled layer change script

[adhanabal]

Hello all
I want to the following action in my machine,
1.On every layer change, i need to switch on a lights for 5 sec, while this lights on , machine should not print (it has to wait for 5 secs)
2. After 5 secs lights to be off , and continue prints
Which code should i use?
Board: Duet3 6HC
Firmware: RRF3.3

[OwenD]

In your slicer layer change script use M226 to pause
M42 to turn on your light
G4 to wait the required time
M42 to turn off your light
M24 to resume printing

[adhanabal]

@owend said in Timing Controlled layer change script:

your

hi thank you i ll test this