configure the x and y position of my print head ?
-
how do I have to configure the x and y position of my print head
do I have to measure the distance to the endstops and enter it? if yes, where
?
and how do i set the x-y position of my z-sensor afterwards
Is that also the distance to the endstops or to the printhead? -
@axiom said in configure the x and y position of my print head ?:
how do I have to configure the x and y position of my print head
do I have to measure the distance to the endstops and enter it? if yes, where
?See https://docs.duet3d.com/User_manual/Tuning/Bed_origin
and how do i set the x-y position of my z-sensor afterwards
Is that also the distance to the endstops or to the printhead?See https://docs.duet3d.com/User_manual/Connecting_hardware/Z_probe_testing#measuring-probe-x-y-offset
Ian