paneldue 7.0i accidentally pushed the "erase" button
-
I tried reflashing the firmware using bossa, and i got the screen back, back it doesn't connect to the duet board. I'm new to this, trying to just install this board, and so it may be a simple solution. I tried installing the firmware manually on DWC using M997 S4 but then get this error: "Error: M997: Aux port 0 is not enabled or not in PanelDue mode". Could someone help me get in the right path with this screen setup?
-
@christian_landry-0 if you hit the erase button, flashing firmware from the printer likely won't work. You will need to flash over USB (see https://docs.duet3d.com/en/User_manual/RepRapFirmware/Updating_PanelDue#firmware-update-via-usb).
<>RatRig V-Minion Fly Super5Pro RRF<> V-Core 3.1 IDEX k*****r <> RatRig V-Minion SKR 2 Marlin<>
-
What firmware version did you try reflashing exactly?
What firmware version is on the Duet? -
@christian_landry-0 try sending M575 P1 B57600 S1 (although you should already have that command in config.g) and then M997 S4 again.
Duet WiFi hardware designer and firmware engineer
Please do not ask me for Duet support via PM or email, use the forum
http://www.escher3d.com, https://miscsolutions.wordpress.com -
@phaedrux panelduefirmware-3.4.1-7.0i.bin
-
@oliof tried that, it fails at 31%, don't know why
-
@christian_landry-0 the only way I get it to work is if I have "erase all" checked while also having "boot to flash" checked
-
@phaedrux the duet has 3.4.3
-
-
@christian_landry-0 I just did it a second time, and it's now successful lol
-
undefined dc42 marked this topic as a question
-
undefined dc42 has marked this topic as solved
-
@christian_landry-0 said in paneldue 7.0i accidentally pushed the "erase" button:
@christian_landry-0 the only way I get it to work is if I have "erase all" checked while also having "boot to flash" checked
Yes, exactly. Just like the instructions show.
