Caution when fitting a mount or adaptor to the 3 holes in the SE
So I redesigned Lykle/Zesty's Nimble holder for the smart effector. Unfortunately the early prototype version I was using did not quite have enough clearance for the large nut that holds the hotend in the z dimension. As such to get the adaptor to sit level, I had to tighten the bolts a little too much, this stiffens the smarteffector PCb, meaning it triggers less well.
So just a note of caution ensure the mount sits passively with a little tolerance to ensure it does not make your SE perform less well than it should.
Dougal1957 last edited by
Lykle had already redesigned that mount to raise the platform by 1mm due to this
Yes ignore this thread in fact I might delete it.
Am now trying this one instead: https://www.thingiverse.com/thing:2740387
As having the nut trap for the large nut is really useful.
EDIT - seems to work okay. Sensitivity is normal.