Esimate weight of printed object…
peirof last edited by
When i slice a object for print it…. Slicer, say me de leght of filamente i will use...
How i can estimate weight of printed object?
1- I suppose that each material will have a density, a weight per meter
2- Does that density change from the roll to the extruded material?
3- The density of a material (ABS, PLA, PETG, ....), changes according to the manufacturer? (In an appreciable way)
4- When the Slicer tells you the meters of material you are going to use, I suppose you will take into account the auxiliary structures. Is there any way to keep them in mind, and take off your weight?
RGN01 last edited by
On Slic3r PE, you can set a density for each filament type and the slicer will calculate weight of filament used to print when it slices.
I used nominal density values and the printed object weights are generally pretty close to the estimated weights. Note that any support material is included in the printed weight.