Duet3D Logo

    Duet3D

    • Register
    • Login
    • Search
    • Categories
    • Tags
    • Documentation
    • Order

    Change V_Fan Select Header to 3 Way Plug

    Firmware wishlist
    2
    2
    378
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • DocTrucker
      DocTrucker last edited by DocTrucker

      Hello, as the heading suggests can the 3 way pin header that is used to select V-IN or 5V for the fans be changed for a 3 way plug like the limits or stepper motor plugs? I remove the jumper and feed the central pin directly so that I can use a specific voltage (in my case 24VDC) but be able to isolate the supply to the steppers and heaters separately to the fans. The three way sockets don't engage positively with the header and is vulnerable to wriggling off!

      Edit; sorry this should have been in the hardware wishlist section.

      Alive: 1 Ormerodish machines. 1 Custom Cantilever. 3 P3Steel. 1 Ciclopish scanner. In build: 1 P3Steel. Controllers: 2 Duet 2 , 2 D0.6, 1 D0.8.5, 1 D3 v0.5, 1 RAMPS/DRV8825, 1 Uno/Scan Card.

      1 Reply Last reply Reply Quote 0
      • Phaedrux
        Phaedrux Moderator last edited by

        I used a single DuPont connector and it seemed to wedge very tightly onto the pin.

        Z-Bot CoreXY Build | Thingiverse Profile

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA