Controller Ills
-
Still having problems with my controller.
Fan1 no longer reports, irregardless of M104 settings, randomly runs or not.EtherNet drops connection intermittently, only two devices on the network, LapTop and DUET-E controller.
Still can't cause the Smart-Effector (E3D-V6) hot-end to attain minumum PLA printing temperatures.
I think its broken, aside from the heat-bed power-FET short.
3mm
-
@3mm said in Controller Ills:
Still can't cause the Smart-Effector (E3D-V6) hot-end to attain minumum PLA printing temperatures.
Multiple issues like that can be caused by a power issue, either a bad PSU or a bad connections between the PSU and the VIN terminals of the Duet. In the M122 report, what values are given for the min and max VIN voltage?
