cant home :(
tenij000 last edited by
all try home get error
got connect 1 endstop if touch endstop a red light turns on on board
firmware says NO and if touch it says yes
try to do home axel nothing try home all nothing
what i do get error the stepper motors do nothing
got laptop connect via wifi
nhof last edited by
To home you will need to have a home script in the /sys/ folder of your system.
It sounds like the switch is wired up correctly, so your problem is either the incorrect home script or a motor drive problem.
Please post your homing scripts from the /sys/ folder.
Phaedrux last edited by
This may help.