Updating Anet A6 printer with Duet motherboard?
kittyhawk last edited by
Hello, this is my first posting on the forum, I have a 3D printer an Anet A6. Has anyone updated the hardware using a Duet Motherboard and Screen. If so could anyone advise on this? and in particular what software would be the best to use.
I would like to cut down the noise from the Stepper motors and naturally improve the print quality.
Many thanks. Kitty hawk.
dc42 administrators last edited by dc42
@kittyhawk , welcome to the forum!
If you search these forums for Anet you will find several posts about converting the Anet A8 to Duet electronics. I don't recall seeing the A6 mentioned before.