PanelDue firmware info in DWC
resam last edited by
Not sure if there is a PanelDue Firmware Wishlist, so I'm opening a new topic:
Every time there is a new PanelDue firmware, I have to think hard about which hardware version I have, and which firmware is currently flashed onto it.
It would be great if DWC could display this, next to the Duet & DWC information box in the Settings tab.:
Ideally, it would display this:
PanelDue v3 electronics with a 5'' screen connected, running Firmware version 1.22
I'm not aware of any info exchange in the current system, so I would propose adding a new M-code which is sent by PanelDue after connecting to "register" itself with the Duet - unless there is some sort of init handshake before the regular M402 status message start being exchanged.
Good idea! I've added this to the PanelDue firmware work list.
fotomas last edited by
Another Panel Due wish list item:
Current coordinates displayed in move screen.