Duet Wifi not working.
-
Was entering some values on the Panel due 5 when there was a soft snap sound. Now the Duet does not power up under main power. Just get a blue led to light up at the top left of the board. If I have the power off, the duet will boot up and show the other LED's under the USB connection. Any ideas as to what is wrong? Fuses look ok. The board shows no component damage.
-
It sounds to me that the on-board 5V regulator has failed. Check that the 5V_INT_EN jumper is seated correctly, and if so then make a warranty claim.
Were you powering anything else from the 5V output of the Duet, apart from the PanelDue?
-
I was not powering anything else other than the panel due. The USB was unconnected at the time. The board is less than a month old. Where do I go to file the warranty claim.
-
@jeff-morovich, see https://www.duet3d.com/warranty if you bought it directly from Duet3d, otherwise contact whoever you bought it form.