G28 "Error: over temperature shutdown reported by driver(s) 3"



  • Hi, I was doing some wire management, so disconnected all wires from the Duet2wifi V1.4 and reconnected everything back when I got the subject error. I get the error as soon as I home any axis or home All. However all 3 axis home properly and I can move them without issues.
    I'm afraid to try printing anything till I understand what is wrong.

    Appreciate some help to try and resolve this error.


  • administrators

    Driver 3 is the output labelled E0, so probably connected to your extruder.


 

Looks like your connection to Duet3D was lost, please wait while we try to reconnect.