I think i found it i at some point lost a S3 in bed.g
Latest posts made by KnineDHP
-
RE: Mesh Bed Compensation and Bed Leveling
-
RE: Mesh Bed Compensation and Bed Leveling
@phaedrux Bed.G and config.G are in the original post. Here are all the home files.
Thank you
-
RE: Mesh Bed Compensation and Bed Leveling
Any thoughts? Days of trying and I can't solve for this.
-
Mesh Bed Compensation and Bed Leveling
I have a Railcore and something is not working with bed leveling and the Mesh grid. both my right sides are -Z and both the left are +Z the bed leveling should fix this. i will post the configs below.
What i don't understand is why is it not just lowering the left or raising the right to get it closer?
Thank you all in advance for looking at this.
Bed.G
M561
G30 P0 X10 Y48 Z-99999
G30 P1 X10 Y254 Z-99999
G30 P2 X300 Y185 Z-99999
G1 X0 Y0 F5000Prep to print script
G28
G32
G32
G32
G28 Z
G91
G1 Z5
M557 X48:254 Y48:254 S206
G29
G28 ZResult of the mesh output
Front left X48 Y48 Z0.051
Rear Left X48 Y254 Z0.031
Front Right X254 Y48 Z-0.035
Rear Right X254 Y254 Z-0.082