@Veti how this relates to the levelling problem?
Latest posts made by RYNR
-
RE: Dual Z bed Levelling and strange behavior
-
RE: Dual Z bed Levelling and strange behavior
Right, so what is curios should we be the only two with this problem or is there e better headline for this topic?
-
RE: Dual Z bed Levelling and strange behavior
Hello Chas and welcome to this topic.
Also your deviations make no sense for me.For example:
10:35:53: M292: Leadscrew adjustments made: 0.038 0.035, points used 2, deviation before 0.037 after 0.000
For my understanding the first point triggers at 0.038 and the second at 0.035 so in my opinion the deviation is 0.038 - 0.035 = 0.003 and not 0.037. Or do i get something wrong?
-
RE: Dual Z bed Levelling and strange behavior
The G30 command is also stored in home.g and homeall.g. When one of those is called the compensation is called. Anyway the problem also is there. Why it compensates every time also when I run the command several times in a row?
At one point there should be nothing to compensate?
Also, if you look at my tests in all cases the deviation seems to be miscalculated?
-
RE: Dual Z bed Levelling and strange behavior
Helo Veti,
thanks for your reply. M671 has moved to home.g and homeall.g. Can I put it in bed.g if I also want to define mesh for compensation?
I thought bed.g only is called with G32?
Also I don't understand why the deviation before is 0.438 when the probe is triggered on both sites at 0.438???
-
Dual Z bed Levelling and strange behavior
Hi everybody,
I have set up Dual Z bed leveling with Duet IR-Probe on my CoreXY. But anyways I have some strange behavior while leveling Z.
So for testing I repeated the leveling process several times and everytime i get the message "Leadscrew adjustments made". For my understanding after leveling Z once it should stay leveled as long as I don't turn off the motors. Here are the Results of my testing from the G-Code console:
19:41:46G28 Z
Leadscrew adjustments made: 0.438 0.441, points used 2, deviation before 0.439 after 0.000
19:41:24G28 Z
Leadscrew adjustments made: 0.438 0.438, points used 2, deviation before 0.438 after 0.000
19:40:59G28 Z
Leadscrew adjustments made: 0.432 0.441, points used 2, deviation before 0.437 after 0.000
19:40:37G28 Z
Leadscrew adjustments made: 0.409 0.475, points used 2, deviation before 0.443 after 0.000
19:40:10G28
Error: Some computed corrections exceed configured limit of 4.00mm: -5.092 -5.020
19:39:32Connection established!Also the computed deviations don't seem to be right?
My configis as follows:
Firmware Name: RepRapFirmware for Duet 2 WiFi/Ethernet
Firmware Electronics: Duet WiFi 1.02 or later
Firmware Version: 2.02(RTOS) (2018-12-24b1)
WiFi Server Version: 1.22
Web Interface Version: 1.22.6Also find attached my Setup files from the duet. Any Help is welcome and let me know if you need more information.
3_1565027946196_config.g 2_1565027946196_homeall.g 1_1565027946194_homez.g 0_1565027946194_bed.g
-
RE: New Duet 2 Wifi won't connect to network
Ok, Does your router allow new connections? Also check that the network you try to connect to is 2.4GHz.
-
RE: New Duet 2 Wifi won't connect to network
Have you put the name of your network between the two “” of the S Parameter in M587? Also you must use the right lettering, cause case sensitive.
You also can post a picture of your setup commands, so we can give better support.