Hi! I use board Duet2WiFi and REPRAP firmware 3.0 release. If i write in file config.g :
M950 F0 C"fan0" Q100
M950 F1 C"fan1" Q100
M950 F2 C"fan2" Q100
M106 P0 S0 H-1
M106 P1 S0 H-1
M106 P2 S0 H-1
all fans work correctly.
But when I change the sequence definition for fan pins to any other, then some fans not working.
Example:
M950 F0 C"fan1" Q100
M950 F1 C"fan0" Q100
M950 F2 C"fan2" Q100
M106 P0 S0 H-1
M106 P1 S0 H-1
M106 P2 S0 H-1
fan0 not working.
Command M106 P0 says: "Error: Fan number 0 not found"