@AndreaM said in Problems while configuring IDEX:

@sebkritikel said in Problems while configuring IDEX:

In my G10 command, I actually have the offsets applied differently - different IDEX machine of course, my X homes to the low side, U to the hide side. I also have my (0,0) at the center of the bed.

yes, i added both T-1 P0 and the tpre code you recommended .

i've been able also to fix offset thanks to yours suggestion. here's the correct command:

G10 P2 X-220 Y0 U20 S0 R0 ; set tool offsets and temperatures for tool 2

next step is print test

thanks for the time you spent. i have a workshop, if you need something milled just let me know.

Happy to help!