@SIam i am sorry for the late replay i thought i had notifications enabled which i apparently didn’t and forgot to check back in till today.
thanks for your replay!
It doesn’t matter if the machine is cold or warm. When i start/reset it it sometimes jumps to 2000°c with no apparent clue of why it happens. It doesn’t matter wether the machine is warmed up or completely cold, if i restart the machine i think 3 times out of 10 it starts with 2000°c reading.
I don’t mind that behavior too much, it is the sudden crashing while printing that bothers me. Sometimes it is a minute into printing sometimes it is after 30mins and have not gotten past 30minutes without the error.
I will try what the next reply suggests and upgrade the firmware and check if that helps.