@Veti Thanks. I will try although it is fixed in an extremely difficult place to access.
Latest posts made by Bags
-
RE: Please help. Z Axis no longer Homes after random crash
-
RE: Please help. Z Axis no longer Homes after random crash
Ok, so I tested all three limit switches with a multimeter this evening. On both the X and Y switches I get a constant value of 1 when the switches are triggered/depressed. When I release them, I get a variable reading much closer to zero. When I test the Z switch - regardless of whether the switch is open or triggered - the value is a constant 1. Does this indicate that the Z limit switch has failed? I presume so but I have very little/no experience with this kind of thing The guys who supplied my cnc are shipping out a replacement anyway.
-
RE: Please help. Z Axis no longer Homes after random crash
@Veti Thanks. I'll let you know how I get on.
-
RE: Please help. Z Axis no longer Homes after random crash
@Phaedrux Ok, thanks! I'll do this as soon as I can and let you know what results I get (most likely tomorrow).
-
RE: Please help. Z Axis no longer Homes after random crash
@Veti showing my stupidity here but how should the multimeter respond if the switch is no good/good? Thanks
-
RE: Please help. Z Axis no longer Homes after random crash
@Phaedrux yes, I can jog in both directions
-
RE: Please help. Z Axis no longer Homes after random crash
I have just moved the axes off the Home position X and Y are not stopped, Z is at max stop:
-
RE: Please help. Z Axis no longer Homes after random crash
X: at max stop, Y: at max stop, Z: at max stop, Z probe: not stopped
-
RE: Please help. Z Axis no longer Homes after random crash
I have the Micro SD card in my laptop right now. It may take me some time to output the result of M119. Hang on whilst I try
-
RE: Please help. Z Axis no longer Homes after random crash
Please let me know if these are all that you need. I have included customconfig.g. As I understand, settings in this file override config.g. Thanks for responding.