Curse you exFAT, my eternal nemesis!!
Yep, that did it. Reformatted my card and now we're all hunky-dory.
Thanks dc42
Curse you exFAT, my eternal nemesis!!
Yep, that did it. Reformatted my card and now we're all hunky-dory.
Thanks dc42
The board's startup message is
RepRapFirmware for Duet 2 WiFi/Ethernet Version 2.02(RTOS) dated 2018-12-24b1
Cannot mount SD card 0: code 13
Network disabled.
RepRapFirmware for Duet 2 WiFi/Ethernet is up and running.
After running M122 I get
```=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.02(RTOS) running on Duet Ethernet 1.02 or later
Board ID: 08DGM-917DA-G4MS4-6JKDL-3SJ6R-TBXR9
Used output buffers: 1 of 20 (1 max)
=== RTOS ===
Static ram: 25524
Dynamic ram: 97732 of which 0 recycled
Exception stack ram used: 256
Never used ram: 7560
Tasks: NETWORK(ready,2048) HEAT(blocked,1232) MAIN(running,4748) IDLE(ready,200)
Owned mutexes:
=== Platform ===
Last reset 00:01:29 ago, cause: reset button or watchdog
Last software reset at 2019-06-21 03:58, reason: User, spinning module GCodes, available RAM 6944 bytes (slot 2)
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0041f000 BFAR 0xe000ed38 SP 0xffffffff Task 0x4e49414d
Error status: 0
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 0.0ms, max retries 0
MCU temperature: min 35.8, current 36.6, max 36.7
Supply voltage: min 1.6, current 1.7, max 1.7, under voltage events: 0, over voltage events: 0, power good: no
Driver 0: ok, SG min/max not available
Driver 1: ok, SG min/max not available
Driver 2: ok, SG min/max not available
Driver 3: ok, SG min/max not available
Driver 4: ok, SG min/max not available
Date/time: 1970-01-01 00:00:00
Cache data hit count 155096071
Slowest loop: 0.15ms; fastest: 0.06ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0
=== Move ===
Hiccups: 0, StepErrors: 0, LaErrors: 0, FreeDm: 240, MinFreeDm: 240, MaxWait: 0ms, Underruns: 0, 0
Scheduled moves: 0, completed moves: 0
Bed compensation in use: none
Bed probe heights: 0.000 0.000 0.000 0.000 0.000
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1
=== GCodes ===
Segments left: 0
Stack records: 0 allocated, 0 in use
Movement lock held by null
http is idle in state(s) 0
telnet is idle in state(s) 0
file is idle in state(s) 0
serial is ready with "M122" in state(s) 0
aux is idle in state(s) 0
daemon is idle in state(s) 0
queue is idle in state(s) 0
autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 0.15ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 0 of 8
Interface state 0, link down
ok
Hi there,
I bought my Duet board back in May, worked with it for a little while but I had to pause my 3d printer progress over the summer.
I now tried to get it running again and it no longer seems to read the SD cards.
I powered it on yesterday and I get the message "cannot mount sd card 0: code 13"
I've tried several different SD cards and fully reflashed them all, no successes.
Is there any reason why it would fail like that after sitting cold for 4 months?