Did you get anywhere with the configuration for this. Im particularly interested in the air/mister configuration if you can help?
Thanks Guys. Maybe i'll "switch" to NPN and go with your suggestions. Thanks for your help with that.
Its a version 1.04 and apparently can withstand 8.6v but the supply to the sensor would ideally be 24v or Vin.
Although overkill i have an M12 PNP inductive sensor id like to use as an end stop. Easy right? However the Duet 2 Wifi only supports end stops with an operating voltage of 3.3v and these inductive sensors operate between 10v - 30v. Is it possible to to use such a sensor? I assume the voltage back to the duet on trigger would be similar as the supply voltage so this could fry the duet.
If possible some solution suggestion would be appreciated.
Im new obvs. Have been using duet wifi for a CNC mill for about 6 months. I haven't written many macros.
I decided i wanted to write a macro to probe the bed in a single location as a means to calculate the tool offset after a manual tool change.
But im stuck at the starting blocks. Can you move with the machine coordinates and how?
In my head i thought id do something like this..
G1 X100 Y0 F500
But that moves from the work coordinates system rather than from the origin or home location. Either would work for me.
Any pointers would be fab.