@Phaedrux said in RRF 3 with piezo z probe not working:
G1 X150 Y150 F6000 ; move probe to center of bed G30 ; probe for Z0
Thank you the homing works now.
I still have one question.
Would this homing homingall.g be allright?
G91 ; use relative positioning
G1 H2 X0.5 Y-0.5 F10000 ; energise motors to ensure they are not stalled
M400 ; make sure everything has stopped before we change the motor currents
M913 X20 Y20 ; drop motor currents to 25%
G1 H2 Z3 F5000 ; lift Z 3mm
G1 H1 X-400 F3000 ; move left 400mm, stopping at the endstop
G1 H1 Y-400 F3000 ; move left 400mm, stopping at the endstop
G92 X0 Y0 ; set position x and y
G1 X3 F300 ; move away from the endstops
G1 Y3 F300 ; move away from the endstops
G1 H1 X-10 ; fine home X
G1 H1 Y-10 ; fine home X
G90 ; back to absolute positioning
G92 X0 Y0 ; set position x and y
G1 X25 Y25 F300 ; go to position
G92 X0 Y0 ; set position x and y
M400 ; make sure everything has stopped before we reset the motor currents
M913 X100 Y100 ; motor currents back to 100%
G91 ; use relative positioning
G1 X150 Y150 F6000 ; move probe to center of bed
G30 ; probe for Z0
G90 ; back to absolute positioning
G1 X0 Y0 F1000 ; Park
G1 Z0 F200 ; Park
Thank you