@Phaedrux said in Duet2 Wifi goes crazy when printing second print after first one:
Can you post the first 50 lines or so of your sliced gcode file?
You're using stall detection on Z?
Do you have Cura set to use relative extrusion?
Here you go!
First time printing this, no problem. After finishing and printing the exact same file without restart/emergency stop inbetween it will freak out
flowRateCalibrationCube_0.8mmWalls.gcode
Im using stall detection on all axis for homing. Z homes to maximum value (nozzle in the air). Usually need like 0.10-0.15 babystepping to get good first layer.
Cura is set to relative extrusion (seems to be default).
Thanks