@deckingman Thanks for the help. it works fine now.
Posts made by Kaizer
-
RE: BondTech CR-10S Extrusion Problem
-
RE: BondTech CR-10S Extrusion Problem
@Veti what do u mean by r parameter? sorry i dont really understand programming language.
-
RE: BondTech CR-10S Extrusion Problem
@Veti Thanks, so its gonna be
M305 P1 T100000 B4725 C7.060000e-8 ; set thermistor + ADC parameters for heater 1
?
-
RE: BondTech CR-10S Extrusion Problem
@deckingman Thanks alot. will give it a try now.
-
RE: BondTech CR-10S Extrusion Problem
@Veti i see, Im actually wondering about it too. but since i dont know much about it. i just leave it as is and do a temperature tower later on.
Im using the stock Bed thermistor for CR-10S and E3D V6 Tube Thermistor for my hotend. i dont know what their names are so idk what to set my thermistor as. if you know, mind sharing it? thanks.
-
RE: BondTech CR-10S Extrusion Problem
@deckingman Thanks. It makes a lot of sense now.
My Slicer start Gcode is only
G28 ; home all axes
G1 Z5 F5000 ; lift nozzleshould i add T0 as u said? if yes can u give me an example of the completed code?
-
RE: BondTech CR-10S Extrusion Problem
M584 X0 Y1 Z2:3 E4 ; set drive mapping
M350 X16 Y16 Z16:16 E16 I1 ; configure microstepping with interpolation
M92 X100.00 Y100.00 Z400.00:400.00 E415.00 ; set steps per mm
M566 X900.00 Y900.00 Z24.00:24.00 E300.00 ; set maximum instantaneous speed changes (mm/min)
M203 X12000 Y12000 Z2000.00:2000.00 E6000.00 ; set maximum speeds (mm/min)
M201 X3000.00 Y3000.00 Z100.00:100.00: E10000.00 ; set accelerations (mm/s^2)
M906 X750 Y750 Z750:750 E650 I30 ; set motor currents (mA) and motor idle factor in per centas to why i have 2 Z settings. if i dont do it like this. my extruder wont even move.
-
RE: BondTech CR-10S Extrusion Problem
Print Temp is the same as to when i calibrate Esteps. so i dont think is not hot enough.
-
RE: BondTech CR-10S Extrusion Problem
; Drives
M569 P0 S0 ; physical drive 0 goes backwards
M569 P1 S0 ; physical drive 1 goes backwards
M569 P2 S1 ; physical drive 2 goes forwards
M569 P3 S1 ; physical drive 3 goes forwards
M569 P4 S0 ; physical drive 4 goes backwards
M584 X0 Y1 Z2:3 E4 ; set drive mapping
M350 X16 Y16 Z16:16 E16 I1 ; configure microstepping with interpolation
M92 X100.00 Y100.00 Z400.00:400.00 E415.00 ; set steps per mm
M566 X900.00 Y900.00 Z24.00:24.00 E300.00 ; set maximum instantaneous speed changes (mm/min)
M203 X12000 Y12000 Z2000.00:2000.00 E6000.00 ; set maximum speeds (mm/min)
M201 X3000.00 Y3000.00 Z100.00:100.00: E10000.00 ; set accelerations (mm/s^2)
M906 X750 Y750 Z750:750 E650 I30 ; set motor currents (mA) and motor idle factor in per cent
M84 S30 ; Set idle timeout; Axis Limits
M208 X0 Y0 Z0 S1 ; set axis minima
M208 X300 Y300 Z400 S0 ; set axis maxima; Endstops
M574 X1 Y1 S1 ; set active high endstops; Z-Probe
M574 Z1 S2 ; set endstops controlled by probe
M307 H3 A-1 C-1 D-1 ; disable heater on PWM channel for BLTouch
M558 P9 H5 F420 T6000 A3 ; set Z probe type to bltouch and the dive height + speeds
G31 P500 X32 Y-2 Z5.19 ; set Z probe trigger value, offset and trigger height
M557 X32:300 Y10:300 S134 ; define mesh grid; Heaters
M307 H0 B0 S1.00 ; disable bang-bang mode for the bed heater and set PWM limit
M305 P0 T100000 B4138 R4700 ; set thermistor + ADC parameters for heater 0
M143 H0 S120 ; set temperature limit for heater 0 to 120C
M305 P1 T100000 B4138 R4700 ; set thermistor + ADC parameters for heater 1
M143 H1 S280 ; set temperature limit for heater 1 to 280C; Fans
M106 P0 S0 I0 F500 H-1 ; set fan 0 value, PWM signal inversion and frequency. Thermostatic control is turned off
M106 P1 S1 I0 F500 H1 T45 ; set fan 1 value, PWM signal inversion and frequency. Thermostatic control is turned on
M106 P2 S1 I0 F500 H1 T45 ; set fan 2 value, PWM signal inversion and frequency. Thermostatic control is turned on; Tools
M563 P0 D0 H1 F0 ; define tool 0
G10 P0 X0 Y0 Z0 ; set tool 0 axis offsets
G10 P0 R0 S0 ; set initial tool 0 active and standby temperatures to 0C; Custom settings are not defined
; Miscellaneous
M911 S10 R11 P"M913 X0 Y0 G91 M83 G1 Z3 E-5 F1000" ; set voltage thresholds and actions to run on power loss -
BondTech CR-10S Extrusion Problem
Hi,
I just finished upgrading my CR-10S with Duet 2 wifi. Tried to do 1st print and failed miserably.
When its printing, i cant see any filament being extruded. the gears are moving but nothing, and i also hear clicking sound from my extruder. Im so confused on what is going on. Esteps calibration using G1 E100 F100 works well. Using the extude button from the web-interface also works well. Checked the flow when calibrating Estep and i can see its not clogging. Infact its so smooth. It only happens when i try to print something. Im using PrusaSlicer with RepRap as the G-code flavor. Can anyone help me fix this? My extruder are working fine if its not printing. FYI : tried Simplify3d too. same issue. -
RE: CR-10S AUTO BED COMPENSATION
@jay_s_uk i did set my XY offsets from nozzle.
Thanks alot for the site. But since english is not my first language im having trouble understanding Halfway point, calibration factors, Probing radius(im not using Delta type) ? -
CR-10S AUTO BED COMPENSATION
I have recently installed Duet 2 wifi on my CR-10S. I got everything working well but 1 thing i dont understand. Since im using BLtouch. I have to set Auto Bed Compensation.
I know the format comes as Min X - Max X ,
Min Y- Max Y , Grid Spacing. Can anyone tell me how to calculate this according to your bed size? I tried X 10:290 Y 10:290 S56 ((280รท5) since i want it to probe 5x5 Grid. But everytime i do G29. It always skip few grid points saying my probe cant reach it. Can someone tell me how to calculate it? Or share their auto bed compensation setting?
Thanks. -
RE: CR-10S Dual Z Config
Guys, Thanks alot for the reply and help. i really appreciate it. I have fixed my issue. it was a stupid mistake on my part i did not reinstall the black jumpers on the extra open Z slot on my duet. once i installed it back. everything went smoothly.
-
RE: CR-10S Dual Z Config
i just knew about the thing you send me but unfortunately. my current config is in the right order for that part.
M569 P0 S0 ; Drive 0 (X) goes backwards
M569 P1 S0 ; Drive 1 (Y) goes backwards
M569 P2 S1 ; Drive 2 (Z1) goes forwards
M569 P3 S1 ; Drive 3 (E) goes forwards
M569 P4 S1 ; Drive 4 (Z2) goes forwards
M584 X0 Y1 Z2:4 E3 ; Driver 0=X, 1=Y, 2+4=Z, 3=E
M350 X16 Y16 Z16 E16:16 I1 ; configure microstepping with interpolation
M92 X100.00 Y100.00 Z400.00 E415.00:400.00 ; set steps per mm
M566 X900.00 Y900.00 Z24.00 E300.00:24.00 ; set maximum instantaneous speed changes (mm/min)
M203 X60000.00 Y60000.00 Z6000.00 E1500.00:6000.00 ; set maximum speeds (mm/min)
M201 X1000.00 Y1000.00 Z100.00 E10000.00:100.00 ; set accelerations (mm/s^2)
M906 X800 Y800 Z800 E650:800 I30 ; set motor currents (mA) and motor idle factor in per cent
M84 S30 ; Set idle timeout -
RE: CR-10S Dual Z Config
i did try to switch between the 2 on my board.
Prev, Right side Z stepper is on Z Drive 2( Z stepper slot) its moving smoothly.
Then, i switch Right side Z stepper (Drive 2) placement with the other Z stepper. and now its the other way around. the left one turn smoothly while the right one does not. so im pretty sure that my Cables are fine. Is there anything i have to add to my config aside from the ones that i have posted to make this work? -
RE: CR-10S Dual Z Config
Yes, its not moving in sync. when i move my Z only one of the Z stepper is turning smoothly. and the other is moving as if its forced to.
-
CR-10S Dual Z Config
I've recently install duet 2 wifi to my CR-10S. Everything is going well except for the Dual Z Stepper set up. I have read a lot of post about it and moved my second Z Stepper to E1 spot. I have only made these changes to my config.
" M569 P0 S0 ; Drive 0 (X) goes backwards
M569 P1 S0 ; Drive 1 (Y) goes backwards
M569 P2 S1 ; Drive 2 (Z1) goes forwards
M569 P3 S0 ; Drive 3 (E) goes backwards
M569 P4 S1 ; Drive 4 (Z2) goes forwards
M584 X0 Y1 Z2:4 E3 ; Driver 0=X, 1=Y, 2+4=Z, 3=E"
and i still can't have it working properly. My CR-10S modifications are these mentioned below.- Bondtech Direct Drive
- E3D V6 12V
- BLTouch
As you can see i have not changed my PSU to 24V its still the stock 12V. If its not needed i would not like to change to 24V as it means that i have to change few things to the 24V version. I would really appreciate it if you guys would let me copy your config.g if you have the same modifications as i did. Aside from that i would really appreciate your help to how i can fix this dual Z issue.