From your config.g file:
G10 P0 R210.0:220.0 S230.0:240.0 ; set initial tool 220 active and standby temperatures to 230C
M116 H1:2 S2 ; wait for heater 1 and 2 to reach temperatures within +,- 2 degrees
You haven't selected a tool, so the M116 command won't wait. You need to select Tool 0 before you extrude. However, we don't expect any movement or heating to be done in config.g. So I suggest you put the G10 temperature setting commands, the T0 or other tool selection command, and the M116 command in a separate macro file.