Duet3D Logo

    Duet3D

    • Register
    • Login
    • Search
    • Categories
    • Tags
    • Documentation
    • Order
    1. Home
    2. michael_t3d
    • Profile
    • Following 0
    • Followers 0
    • Topics 2
    • Posts 4
    • Best 0
    • Controversial 0
    • Groups 0

    michael_t3d

    @michael_t3d

    0
    Reputation
    1
    Profile views
    4
    Posts
    0
    Followers
    0
    Following
    Joined Last Online

    michael_t3d Unfollow Follow

    Latest posts made by michael_t3d

    • The Duet3D board is unresponsive

      Hi,

      Board: Duet 2 WiFi/Ethernet Version 2.05

      I've connected it to the PC with the USB cable using the following guide:
      https://duet3d.dozuki.com/Guide/1.)+Getting+Connected+to+your+Duet/7

      It provides basic information (photo: https://ibb.co/Sv831wZ), but whenever I'm sending any commands, for example, M115, it does not generate a response.

      Please advise on the possible solution.

      posted in Using Duet Controllers
      michael_t3d
      michael_t3d
    • RE: Duet 2 WiFi/Ethernet Printer Is Not Online

      @jay_s_uk

      Just to double-check, this is the part I need to connect to make sure it's on 24V power, correct?

      f2bc47cd-d0d4-42bf-bb6c-4f565d9f3044-image.png

      posted in Duet Web Control
      michael_t3d
      michael_t3d
    • RE: Duet 2 WiFi/Ethernet Printer Is Not Online

      @jay_s_uk said in Duet 2 WiFi/Ethernet Printer Is Not Online:

      You could try reflashing the WiFi firmware using M997 S1. The one you want is version 1.23

      Well, it is on 24V power.

      I've tried this command and it didn't help.

      What's the next step?

      posted in Duet Web Control
      michael_t3d
      michael_t3d
    • Duet 2 WiFi/Ethernet Printer Is Not Online

      I own a Modix Big-60 3D printer, and I am trying to run a test print now, but I cannot get the printer to connect to wifi or respond via USB, and no relevant data comes up on the touchscreen panel, it just shows the generic duet screen without anywhere filled in with macros and doesn't show the temp readings either.

      I've been using this guide to try to connect:
      https://duet3d.dozuki.com/Guide/1.)+Getting+Connected+to+your+Duet/7#s11

      I've taken off the Duet Board from my other printer and it works just fine, so there seems to be some malfunction with this one.

      Troubleshooting:

      1. I've tried all the M commands including the M997 S1 and it has had no effect.

      2. Then I was instructed that when connected via the 24V, the VIN (blue LED), +5V (Red LED) and +3.3V (Green LED) should be lit.

      https://ibb.co/YpssYPD

      Well, in my case VIN doesn't light up:

      https://ibb.co/vqLBN6y

      And I cannot get past this error:

      https://ibb.co/7CbvM63

      (I've also tested if this is related to the cables. I tried several different micro usb cables, some of which are known to work with data, no progress from this effort.)

      Please advise, what the problem is and how I can troubleshoot it.

      posted in Duet Web Control
      michael_t3d
      michael_t3d