@tjb1 great which diode do u use ?
Latest posts made by Orthocube
-
RE: Inductive sensors as endstop 24V
-
RE: Inductive sensors as endstop 24V
me again
i tried it with the diodes now.....
unfortunally non of the diodes worked properly.
non dropped the voltage below 0 always around 1.2 V which the duet doesnt measure as triggered.
by accident i used a diode which i measured in non triggered state 22.6 V by mistake i connected it to the board and it works.... nothing burned.
does that mean the duet has no problem with 22.6 v on that PIN?i am a bit confused
-
RE: Inductive sensors as endstop 24V
thanks alot....looks quite easy.
-
Inductive sensors as endstop 24V
Hi all,
i am planning to use Inductive sensors as endstop on all axis.
My System is running on 24V and i would like to run the sensors on 24 V.What do i have to do not to burn my board?
Thanks for help.