@dc42 Is there anything that I could do to fix it myself, and or is there a common issue/part to fix. I have contacted e3d and still waiting
Posts made by patmurphyp9
-
RE: board not working
-
RE: board not working
@droftarts yes I have tried connecting it using YAT and I didn't even get a port response. I did check and there was something between the connection and I was able to blow it off, I tried again turning on the board but the same problem is there. I checked the 7.5A fuse and it is intact, and I have used a multimeter and I'm not seeing 3.3v anywhere close
-
RE: board not working
would it be possible a fuse is blown because of the only thing that isn't working is the 3 volt supply
-
RE: board not working
@Phaedrux I just tried that and nothing changed, but the always-on fan is working
-
RE: board not working
@jens55 I have also just to show you i=have plugged everything in to see if that would work but still not getting any 3.3v power or connectivity
-
board not working
Hi, I recently bought a duet 2 wifi board. I received the board yesterday and trying to get is all set up. but it does not do what it is supposed to and on the documentation, it says that there should be three lights that turn on, only one is on. I don't know if the board has a fault but I haven't even had time to make any connections and have not done anything else to the board to damage it. I was wondering who I might be able to talk to to get a replacement or if they know what the problem is. I have taken pictures to prove and have contacted the resaler E3D Online any help would be greatly appreciated