@phaedrux Thanks for your patience..... Yes I see now. I was making a wrong assumption about the panel due pushing the firmware to the board.... Let me try all of that now that you have knocked some sense into me!
Best posts made by pgantt
-
RE: New Guy Big Firmware Issues
-
RE: New Guy Big Firmware Issues
@phaedrux Success!!! Firmware in with updates. Thanks for being patient and for all the help. Issue resolved!
Latest posts made by pgantt
-
RE: New Guy Big Firmware Issues
@phaedrux Success!!! Firmware in with updates. Thanks for being patient and for all the help. Issue resolved!
-
RE: New Guy Big Firmware Issues
@phaedrux Thanks for your patience..... Yes I see now. I was making a wrong assumption about the panel due pushing the firmware to the board.... Let me try all of that now that you have knocked some sense into me!
-
RE: New Guy Big Firmware Issues
@phaedrux here is a video of me running the process. If you have a second to look over I would really like to know if something is wrong with my process. It's about 5 minutes. Thanks to all.
-
RE: New Guy Big Firmware Issues
@jay_s_uk I have done that as well with the same results.
-
RE: New Guy Big Firmware Issues
@phaedrux yes it does. Each time everything checks out. It writes clean and it verifies and then I reset it and it drops all connection. I have tried over and over with different usb cords, different ports, different computers and i get the same results out of the board.... White screen with no connection unless I erase and reset back to bossa port.
-
RE: New Guy Big Firmware Issues
@phaedrux I have done that one already. Once I upload it and hit reset I lose connectivity to the computer as well as a blank white screen. I have run this process many, many times to see if there is something I have done wrong. After the firmware is in and I reset/power cycle the board I cannot do anything else with it as no matter what I do it will not connect via usb. Nor is there anything on the screen. I'll do a screen cap tomorrow of exactly what I am doing an maybe someone can help point out what I am doing wrong here. Thanks all for your input.
-
RE: New Guy Big Firmware Issues
@jay_s_uk this is what Modix sent me to push to the Duet.
-
RE: New Guy Big Firmware Issues
@chrishamm I have just been using the "erase" button supplied on the panel.
-
RE: New Guy Big Firmware Issues
@jay_s_uk duet 2 combined firmware and panelduefirmware 3.3.0 5.0i-7.0i.
pg
-
RE: New Guy Big Firmware Issues
@jay_s_uk I have been able to get my screen back up but once I have that in I cannot get my computer to recognize. the board as anything. I have installed the Duet Driver onto my PC and it says that it was successful but all I am seeing is "connecting" in the top right of the Duet screen with nothing showing on device manager. I have reset the board using the reset button as well as a physical disconnect with the computer with no difference. The only way I can get the computer to recognize the board is to erase it and then I am back to square one as it being recognized as Bossa Port.
At times in Bossa uploader it will say that flash is not large enough (I am paraphrasing) and it will not let me write. If I run a read it will then allow me to 'write". Is that a symptom of a different problem?
The console will still not take gCode commands. I am kind of at a loss. Any other hints or ideas?