@phaedrux
Hi thanks for helping
Actually, I'm trying to write a macro for an automatic z offset calibration.
First I want the nozzle to touch the bed with, (G30 Z-1) the external trigger, and then I would the printer to touch the bed with the probe (also with G30 Z-1).
Thank you very much!
Latest posts made by Saarneu
-
RE: External trigger during a macro
-
RE: External trigger during a macro
@cosmowave said in External trigger during a macro:
M582
Ohh my bad yeah sorry
Ok, so the M582 T2 command called "Trigger2.g" immidietly.
I tried also putting M25 in the same file but:
"M25: Cannot pause print, because no file is being printed!" probably because it is a macro and not a print file. -
RE: External trigger during a macro
@cosmowave
Hi thanks for helping!
sadly:
-
External trigger during a macro
Hi everybody,
I'm using duet wifi 2 + RRF 2.05.
Also, using a cartesian printer with 2 z motors and a BLtouch. I'm trying to write a macro with a configurated external trigger that will pause the movement of the Z axis while homing (G28 Z) once the external trigger is touched. The external trigger should be located somewhere in the middle of the Z-axis.
Is it possible to write such a macro?I already tried adding the next line to the config.g:
M581 E3 S1 T2 C0
I connected the trigger as shown in the DuenWifi2 pinout
And made a simple file called "trigger2.g" with just one line:
M300 S2000 P200Nothing really happened while homing and triggering the trigger.
Please help me
Thank you!