This is the report with 2.02 firmware:
M122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.02(RTOS) running on Duet WiFi 1.02 or later
Used output buffers: 3 of 20 (18 max)
=== RTOS ===
Static ram: 25524
Dynamic ram: 98640 of which 0 recycled
Exception stack ram used: 512
Never used ram: 6396
Tasks: NETWORK(ready,544) HEAT(blocked,1232) MAIN(running,3780) IDLE(ready,200)
Owned mutexes:
=== Platform ===
Last reset 02:14:50 ago, cause: software
Last software reset at 2020-01-06 16:36, reason: Watchdog timeout, spinning module GCodes, available RAM 6312 bytes (slot 1)
Software reset code 0x4053 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0441f814 BFAR 0xe000ed38 SP 0x2000494c Task 0x4e49414d
Stack: 004450eb 0042acdc 61000000 2000857c 200031d4 6f5523d2 a5a5a5a5 a5a5a5a5 a5a5a5a5 a5a5a5a5 0044bb0b 00000000 0044b913 00000008 0043943b 00000000 20009aa8 00000fff 6f5523d2 a5a5a5a5 0042acdd 20008570 20007a00
Error status: 0
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 0.0ms, max retries 0
MCU temperature: min 33.2, current 33.9, max 34.2
Supply voltage: min 12.5, current 12.6, max 12.7, under voltage events: 0, over voltage events: 0, power good: yes
Driver 0: standstill, SG min/max 0/181
Driver 1: standstill, SG min/max 0/172
Driver 2: standstill, SG min/max 83/329
Driver 3: standstill, SG min/max not available
Driver 4: standstill, SG min/max not available
Date/time: 2020-01-06 18:51:32
Cache data hit count 4294967295
Slowest loop: 4.35ms; fastest: 0.08ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0
=== Move ===
Hiccups: 0, StepErrors: 0, LaErrors: 0, FreeDm: 240, MinFreeDm: 238, MaxWait: 3420424ms, Underruns: 0, 0
Scheduled moves: 10, completed moves: 10
Bed compensation in use: none
Bed probe heights: 0.000 0.000 0.000 0.000 0.000
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1
=== GCodes ===
Segments left: 0
Stack records: 2 allocated, 0 in use
Movement lock held by null
http is idle in state(s) 0
telnet is idle in state(s) 0
file is idle in state(s) 0
serial is idle in state(s) 0
aux is idle in state(s) 0
daemon is idle in state(s) 0
queue is idle in state(s) 0
autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 202.49ms; fastest: 0.08ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 1 of 8
- WiFi -
Network state is running
WiFi module is connected to access point
Failed messages: pending 0, notready 0, noresp 1
WiFi firmware version 1.23
WiFi MAC address dc:4f:22:6e:6f:97
WiFi Vcc 3.42, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 25824
WiFi IP address 100.100.100.102
WiFi signal strength -60dBm, reconnections 0, sleep mode modem
Socket states: 0 0 0 0 0 0 0 0
And this is the report with 2.05 firmware:
M122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.05 running on Duet WiFi 1.02 or later
Used output buffers: 1 of 24 (16 max)
=== RTOS ===
Static ram: 25712
Dynamic ram: 93184 of which 372 recycled
Exception stack ram used: 272
Never used ram: 11532
Tasks: NETWORK(ready,752) HEAT(blocked,1232) MAIN(running,3736) IDLE(ready,160)
Owned mutexes:
=== Platform ===
Last reset 00:38:10 ago, cause: software
Last software reset at 2020-01-09 17:26, reason: Assertion failed, spinning module Platform, available RAM 11212 bytes (slot 2)
Software reset code 0x4090 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0441f000 BFAR 0xe000ed38 SP 0x20004b24 Task 0x4e49414d
Stack: 000001a7 00462974 00445543 20002c54 0044d6d1 20002c54 00000000 00000000 ffffffff 20002c54 20003258 0026de28 8e471f13 00462424 a5a5a5a5 a5a5a5a5 0044d87f 20002c48 20004b80 00000000 0044be67 20002c20 004403e7
Error status: 0
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 0.0ms, max retries 0
MCU temperature: min 33.1, current 33.3, max 33.6
Supply voltage: min 12.6, current 12.7, max 12.8, under voltage events: 0, over voltage events: 0, power good: yes
Driver 0: standstill, SG min/max not available
Driver 1: standstill, SG min/max not available
Driver 2: standstill, SG min/max not available
Driver 3: standstill, SG min/max not available
Driver 4: standstill, SG min/max not available
Date/time: 2020-01-09 18:04:11
Cache data hit count 4294967295
Slowest loop: 1.11ms; fastest: 0.07ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Move ===
Hiccups: 0, FreeDm: 160, MinFreeDm: 160, MaxWait: 0ms
Bed compensation in use: none, comp offset 0.000
=== DDARing ===
Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1
=== GCodes ===
Segments left: 0
Stack records: 1 allocated, 0 in use
Movement lock held by null
http is idle in state(s) 0
telnet is idle in state(s) 0
file is idle in state(s) 0
serial is idle in state(s) 0
aux is idle in state(s) 0
daemon is idle in state(s) 0
queue is idle in state(s) 0
autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 200.63ms; fastest: 0.08ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 1 of 8
- WiFi -
Network state is running
WiFi module is connected to access point
Failed messages: pending 0, notready 0, noresp 2
WiFi firmware version 1.23
WiFi MAC address 84:0d:8e:b3:b0:4d
WiFi Vcc 3.39, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 22744
WiFi IP address 100.100.100.102
WiFi signal strength -59dBm, reconnections 0, sleep mode modem
Socket states: 0 0 0 0 0 0 0 0