@dc42 yes instead of making making my Y stepper stepper use drive 2 I told it to use drive 3 and the error went away
Posts made by tvm2487
-
RE: Error: Short-to-ground on drivers 2
-
RE: Error: Short-to-ground on drivers 2
@phaedrux I can try to send m122 and see what happens but like I mentioned the error show up with nothing but power connected to the board. I bought the board from matterhackers
-
Error: Short-to-ground on drivers 2
I recently got my Duet 3 board over the weekend and after getting it all installed in my printer I am getting Error: Short-to-ground on drivers 2. I tried a few different things including unhooking everything but power and the error is still there. However if I turn off driver 2 in the config file and use driver 3 instead the error goes away so I'm not really sure what's going on. Any help is greatly apprenticed
Thanks Tony