I think i have found the problem.
I removed the SD card so that i could update the firmware however my PC couldn't sustain a connection for more than a minute or so. I was able to copy the firmware off the SD card and load it onto a new one, then followed the steps on https://duet3d.dozuki.com/Wiki/Installing_and_Updating_Firmware#Section_Fallback_procedure_Num_1, and so far it is working. So a bit strange but it looks like it was the SD card + firmware needing updating.
Best posts made by Yames
-
RE: Dead board?
Latest posts made by Yames
-
RE: Dead board?
I think i have found the problem.
I removed the SD card so that i could update the firmware however my PC couldn't sustain a connection for more than a minute or so. I was able to copy the firmware off the SD card and load it onto a new one, then followed the steps on https://duet3d.dozuki.com/Wiki/Installing_and_Updating_Firmware#Section_Fallback_procedure_Num_1, and so far it is working. So a bit strange but it looks like it was the SD card + firmware needing updating. -
RE: Dead board?
@oliof I have sadly
The cable i am using was working previously to communicate with the board
-
Dead board?
I have a Duet wifi 2 board which is almost 1 year old.
I have been having trouble with it staying connected to my wifi network despite the wifi strength being -46dB. While trying to trouble shoot the connectivity issue another has developed, I can no longer connect to the board using YAT.All the LEDs to do with the power supply come on as normal and when the mains supply is on the fans start up so i am fairly confident that the issue is not to do with the power supply. Having said that, i have no idea why i cannot connect over YAT and i am wondering if the board is dead.
Can someone help?