Thank you so much Phaedrux! It seems to have worked. I didnt have any issues since then!
Latest posts made by zockerlein
-
RE: Duet "freezes" mid print?
-
RE: Duet "freezes" mid print?
allright, thank you very much!
Ill try that, as soon as my print finishes -
RE: Duet "freezes" mid print?
I attached a screenshot
Im using x256 on X- and Y-axis (without interpolation), but that never caused any problems till two days ago.
M350 X256 Y256 Z128 E32 I0 ; Configure microstepping with interpolation
Print speed is (as allways) 80mm/s.
Ill try running M122 when it occurs again
-
Duet "freezes" mid print?
Hi,
I got a big issue with my Duet Wifi Board.
Sometimes (mostly during long prints, after a few hours or so) my printer simply freezes.
The tool-fan is still running, temperature is being hold, but the printing-head doesnt move at all and the duet doesnt react to any commands.The problem occurred "out of the blue". I didnt change a thing on my printer (worked fine for 2 years) and now it simply stopped working.
I suspected a faulty SD-Card, so I canged it, but the problem remains...
Do you have any suggestions?
Daniel