Help with setting up firmware for coreXY machine - unable to home.

cap

Hi I'm in pity much the same sinario as you I'm coming form a prusa 13 home built marlin firm Ware and building a corexy machine I'd love to see some pics and as I'm waiting for my duet to arrive would love to look over your firmware…. If you don't mind sharing
Thanks in advance

forgets

Thanks everyone, David was right, they switches were set the wrong way in software. Luckily someone posted a link to the reprap configurator https://configurator.reprapfirmware.org. I just deleted all the files present except for the webserver ones and uploaded the zip file. All is working now and the file seems much cleaner, kudos to the reprap firmware team!

Hey david, great work on the wifi!

Just for efficacy though in case anyone else runs into the problem of not being able to get a motor in the correct orientation (I seriously tried flipping the motor connectors to the board and changing stepper driver directions via software in every possibly combination) you'll want to add that extra little bit to the end of the M667 line

[c]M667 S1 Y-1.0[/c]

with mine it was my Y motor, it always went forward instead of backwards, or if I switched connections then my X motor went the wrong way adding the axis X or Y -1.0 makes it go the right way.

As for you cap, I'd seriously recommend the configurator, it's just like the repetier one except with a few more bugs (my config.g had the line for adding interpolation 5 or 6 times repeated).. but here's my config.g now in case you wanted to see

[c]; Configuration file for Duet WiFi
; executed by the firmware on start-up
;
; generated by RepRapFirmware Configuration Tool on Mon Sep 12 2016 13:24:34 GMT-0400 (EDT)

; General preferences
M111 S0 ; Debugging off
G21 ; Work in millimetres
G90 ; Send absolute coordinates…
M83 ; ...but relative extruder moves
M555 P2 ; Set firmware compatibility to look like Marlin

M667 S1 Y-1.0; Select CoreXY mode
M208 X0 Y0 Z0 S1 ; Set axis minima
M208 X300 Y300 Z325 S0 ; Set axis maxima

; Endstops
M574 X1 Y1 Z1 S0 ; Define active high microswitches
;M558 P1 X0 Y0 Z0 H5 F0 T6000 ; Set Z probe type to unmodulated, the axes for which it is used and the probe + travel speeds
;G31 P600 X0 Y0 Z2.5 ; Set Z probe trigger value, offset and trigger height

; Drives
M569 P0 S1 ; Drive 0 goes forwards
M569 P1 S1 ; Drive 1 goes forwards
M569 P2 S1 ; Drive 2 goes forwards
M569 P3 S0 ; Drive 3 goes backwards
M350 X16 Y16 Z16 I1 ; Configure microstepping with interpolation
M92 X87.489 Y87.489 Z400 E420 ; Set steps per mm
M566 X900 Y900 Z20 E120 ; Set maximum instantaneous speed changes (mm/min)
M203 X6000 Y6000 Z180 E1200 ; Set maximum speeds (mm/min)
M201 X500 Y500 Z40 E250 ; Set accelerations (mm/s^2)
M906 X800 Y800 Z800 E800 I30 ; Set motor currents (mA) and motor idle factor in per cent
M84 S30 ; Set idle timeout

; Heaters
M143 S260 ; Set maximum heater temperature to 260C
M570 S150 ; Set maximum heating time to 150s
;M305 P0 T100000 B3950 R4700 H30 L0
M305 P0 T100000 B3950 C0.0000000000000000 R4700 L0 H0 ; Set thermistor + ADC parameters for heater 0
M305 P1 T100000 B3950 C0.0000000000000000 R4700 L0 H0 ; Set thermistor + ADC parameters for heater 1

; Tools
M563 P0 D0 H1 ; Define tool 0
G10 P0 X0 Y0 ; Set tool 0 axis offsets
G10 P0 R0 S0 ; Set initial tool 0 active and standby temperatures to 0C

; Network
M550 PCoreXY ; Set machine name
M552 P0.0.0.0 S1 ; Enable network and acquire dynamic address via DHCP

; Fans
M106 P0 S0.3 I0 F500 H-1 ; Set fan 0 value, PWM signal inversion and frequency. Thermostatic control is turned off
M106 P1 S1 I0 F500 H1 T45 ; Set fan 1 value, PWM signal inversion and frequency. Thermostatic control is turned on
M106 P2 S1 I0 F500 H1 T45 ; Set fan 2 value, PWM signal inversion and frequency. Thermostatic control is turned on

; Custom settings are not configured[/c]

dc42

The other way apart from adding that -1.0 is to swap the X and Y motor connections.

cap

Thankyou
I see I got a lot to learn cart wait to start wading in
P.s congratz on getting it working

chrishamm

forgets, could you upload or send me the config.json file from your generated config bundle? I haven't been able to reproduce your problem where multiple interpolation lines would be generated.

forgets

Hey Chris scratch what I said, I was just looking it over and it's because I'd left interpolation on and off for certain drives like E0 and E1, so that's why it had multiple lines. My apologies, I hadn't looked it over very thoroughly before. By the way, while I have dc42's IR sensor I haven't wired it yet.. as far as I saw there's no way to opt out of Z-bed probing in the configurator, so I just commented out all the bed probing lines and adapted the homing instructions from X to Z. Is there currently a way to not select Z-Probing?

cap

hi thought id add my problem here as it is very similar to the one above my ill get straight to the point and list the problems

x moves when i tell y to move and my y axes move when i tell x to move
if i tell x to move 50mm and i hit the end stop it dose not stop do not want to try a home until i know they stop are working
M119 retruns this report
Endstops - X: at min stop, Y: at max stop, Z: at min stop, Z probe: not stopped
i do not have a z prode and the firmware programe is great but needs a off witch for z prob
my Editing /sys/homeall.g file is below
; homeall.g
; called to home all axes
;
; generated by RepRapFirmware Configuration Tool on Fri Oct 07 2016 11:58:10 GMT+0100 (GMT Daylight Time)

; Relative positioning
G91

; Lift Z
G1 Z5 F6000

; Move towards X and Y axis endstops (first pass)
G1 X-205 Y205 F1800 S1

; Go back a few mm
G1 X5 Y-5 F6000

; Move slowly to axis endstops once more (second pass)
G1 X-205 Y205 F360 S1

; Absolute positioning
G90

; Go to first bed probe point and home the Z axis
G1 X15 Y15 F6000
G30

; Uncomment the following line to lift the nozzle after probing
;G1 Z5 F100

thanks for any help please i am new to gcode commands so full explanations if you do not mind

dc42

Reverse the X motor direction by changing S0 to S1 or vice versa in config.g. This will swap the axes over. If they move in the wrong direction, reverse the Y motor direction instead.

cap

fantastic changed this bit of code and now that x and y work correctly
M569 P0 S1 ; Drive 0 goes forwards
to
M569 P0 S0 ; Drive 0 goes forwards

thankyou for the help any ideas about homing is it a case of changing the homeall flie

dc42

Are you using the homeall.g file from the sys-CoreXY folder in my repo? See also https://duet3d.com/wiki/Configuring_RepRapFirmware_for_a_CoreXY_printer#homeall.g_file.

cap

hi my filing sys folders are a mess here all the folders i have

Size
bed.g 343 B
config.g 2.4 KiB
config.json 2.3 KiB
deployprobe.g 283 B
DuetWebControl.bin 3.0 MiB
DuetWiFiServer.bin 288.3 KiB
homeall.g 335 B
homedelta.g 644 B
homex.g 437 B
homey.g 436 B
homez.g 352 B
iap.bin 52.3 KiB
iap4e.bin 54.1 KiB
pause.g 239 B
resume.g 234 B
retractprobe.g 292 B
sleep.g 54 B
stop.g 86 B
tfree0.g 150 B
tpost0.g 210 B
tpre0.g 153 B
just removed homedelta.g
which to me dose not look right
my homeall.g look like this
G91 ; relative mode
G1 S1 X-200 Y-240 F3000 ; course home X or Y
G1 S1 X-200 ; course home X
G1 S1 Y-200 ; course home Y
G1 X4 Y4 F600 ; move away from the endstops
G1 S1 X-10 ; fine home X
G1 S1 Y-10 ; fine home Y
; Z homing section follows
i changed to the print bed to 200 in xy and z to start with keep to things i know while working this stuff out

thanks for any help the info for all this stuff is all over the places

dc42

The homing switches are only active during homing, so there are no limits on movement until you have homed. For testing homing, you may wish to reduce the homing speed and motor current.

cap

ok ive now removed all the 3 of these files homex.g homey.g homez.g
and just left the homeall.g
i can get x and y to home but not z in fact on the web interface it is now in yellow telling me it not available

dc42

Read https://duet3d.com/wiki/Configuring_RepRapFirmware_for_a_Cartesian_printer#Homing_files. The files for a CoreXY printer are similar except for homeall.g.

cap

ok thanks sorted it
sorry to be a pain could not see it throw looking changed homez to this
G91 ; relative mode
G1 Z4 F200 ; raise head 4mm to ensure it is above the switch trigger height
G90 ; back to absolute mode
G1 X0 Y0 F2000 ; put head wherever you want it to be when you home Z (omit this line if it doesn't matter)
G91 ; relative mode
G1 Z-200 S1 F100 ; move Z down until the switch triggers
G90 ; back to absolute mode
G92 Z0.3

and it worked a treat

thehands1

So I had the same type of issues in the previous posts but now it will home the X and Y axis correctly, The drives go in the right direction…Awesome...but...now when I home everything seems to be locked up when I try to make the X or Y axis to move. I can't move by g-code or by pushing the buttons on the PanelDue or Web page. Any ideas?

I tried the sample g-code:
G91 ; relative mode
G1 S2 X10 ; move the X motor forward 10mm
G1 S2 X-10 ; move the X motor back 10mm
G1 S2 Y10 ; move the Y motor forward 10mm
G1 S2 Y-10 ; move the Y motor back 10mm
G90 ; back to absolute mode

Works UNLESS I home the X axis and Y axis then nothing. It just stops and no further movements work.

dc42

Please post your config.g file. There may be something wrong with your M574 or M208 commands in particular.

What is the displayed X Y position after homing? Are your homing switches triggered at the front left of the printer, or somewhere else?

thehands1

I am homing at the front left of the printer. The XY position displayed is 0,0. The endpoints trigger (and the board LED lights up) when I press the contacts. The X axis increases when I go to the right. The Y axis increases when I go to the back. Here is the config.g

; Configuration file for Duet WiFi (firmware version 1.17)
; executed by the firmware on start-up
;
; generated by RepRapFirmware Configuration Tool on Mon Jul 10 2017 20:30:20 GMT-0600 (Mountain Daylight Time)

; General preferences
M111 S0 ; Debugging off
G21 ; Work in millimetres
G90 ; Send absolute coordinates…
M83 ; ...but relative extruder moves
M555 P2 ; Set firmware compatibility to look like Marlin

M667 S1 ; Select CoreXY mode
M208 X0 Y0 Z0 S1 ; Set axis minima
M208 X400 Y400 Z400 S0 ; Set axis maxima

; Endstops
M574 X1 Y1 Z0 S0 ; Define active low and unused microswitches
M558 P1 X0 Y0 Z1 H5 F120 T6000 ; Set Z probe type to unmodulated, the axes for which it is used and the probe + travel speeds
G31 P600 X0 Y0 Z2.5 ; Set Z probe trigger value, offset and trigger height
M557 X15:385 Y15:385 S20 ; Define mesh grid

; Drives
M569 P0 S0 ; Drive 0 goes forwards
M569 P1 S1 ; Drive 1 goes backwards
M569 P2 S1 ; Drive 2 goes forwards
M569 P3 S1 ; Drive 3 goes forwards
M350 X16 Y16 Z16 E16 I0 ; Configure microstepping without interpolation
M92 X87.489 Y87.489 Z4000 E420 ; Set steps per mm
M566 X900 Y900 Z12 E120 ; Set maximum instantaneous speed changes (mm/min)
M203 X9000 Y9000 Z180 E1200 ; Set maximum speeds (mm/min)
M201 X500 Y500 Z250 E250 ; Set accelerations (mm/s^2)
M906 X800 Y800 Z800 E800 I30 ; Set motor currents (mA) and motor idle factor in per cent
M84 S30 ; Set idle timeout

; Heaters
M143 S260 ; Set maximum heater temperature to 260C
M140 H-1 ; Disable heated bed

; Tools

; Network
M550 PHypercube ; Set machine name
M551 PXXXXXX ; Set password
M552 S1 ; Enable network
M587 SXXXXXX P"XXXXXXX" ; Configure access point. You can delete this line once connected
M586 P0 S1 ; Enable HTTP
M586 P1 S0 ; Disable FTP
M586 P2 S0 ; Disable Telnet

; Fans
M106 P0 S0.3 I0 F500 H-1 ; Set fan 0 value, PWM signal inversion and frequency. Thermostatic control is turned off
M106 P1 S1 I0 F500 H T45 ; Set fan 1 value, PWM signal inversion and frequency. Thermostatic control is turned on
M106 P2 S1 I0 F500 H T45 ; Set fan 2 value, PWM signal inversion and frequency. Thermostatic control is turned on

; Custom settings are not configured

dc42

That looks ok to me. Perhaps it is something in your homing files - please share them too.

What happens if you home just X: are you able to move X and/or Y after that? Similarly if you home just Y.

thehands1

If I home either only X or only Y I can move those axis just fine. It I home both then it locks up. Here are the Homing files:

Homeall
; homeall.g
; called to home all axes
;
; generated by RepRapFirmware Configuration Tool on Mon Jul 10 2017 20:30:20 GMT-0600 (Mountain Daylight Time)

; Relative positioning
G91

; Lift Z
;G1 Z5 F6000

; Course home X or Y
G1 S1 X-405 Y-405 F1800
; Course home X
G1 S1 X-405
; Course home Y
G1 S1 Y-405

: Move away from the endstops
G1 X5 Y5 F6000

; Fine home X
G1 S1 X-10
; Fine home Y
G1 S1 Y-10

; Absolute positioning
G90

; Go to first bed probe point and home Z
G1 X15 Y15 F6000
G30

; Uncomment the following line to lift the nozzle after probing
;G1 Z5 F100

Home X
; homex.g
; called to home the X axis
;
; generated by RepRapFirmware Configuration Tool on Mon Jul 10 2017 20:30:20 GMT-0600 (Mountain Daylight Time)

; Lift Z relative to current position
G91
G1 Z5 F6000
G90

; Move quickly to X axis endstop and stop there (first pass)
G1 X-405 F1800 S1

; Go back a few mm
G91
G1 X5 F6000
G90

; Move slowly to X axis endstop once more (second pass)
G1 X-405 F360 S1

; Lower Z again
G91
G1 Z-5 F6000
G90

Home Y
; homey.g
; called to home the Y axis
;
; generated by RepRapFirmware Configuration Tool on Mon Jul 10 2017 20:30:20 GMT-0600 (Mountain Daylight Time)

; Lift Z relative to current position
G91
G1 Z5 F6000
G90

; Move quickly to Y axis endstop and stop there (first pass)
G1 Y-405 F1800 S1

; Go back a few mm
G91
G1 Y5 F6000
G90

; Move slowly to X axis endstop once more (second pass)
G1 Y-405 F360 S1

; Lower Z again
G91
G1 Z-5 F6000
G90