Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Duet Web Control 2.0.0-RC3 is ready

    Scheduled Pinned Locked Moved
    Duet Web Control
    50
    147
    27.4k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • JRDMundefined
      JRDM
      last edited by JRDM

      So far, I like how it's laid out. Time will tell if it's a more efficient layout.

      I think the "light" scheme is way too flat, not enough contrast between background white and the almost-white sub-boxes. Even on a good monitor it's kind of a big field of almost white on white, on a marginal monitor it all washes out to white and there's no good edges for my eyes to catch onto. It would be helpful if the dividing lines would be a bit thicker too.

      1 Reply Last reply Reply Quote 0
      • kraegarundefined
        kraegar
        last edited by

        Not exactly related to the new version, but I'd love to see the ability to move gcode files into sub directories from within the GUI.

        Co-Creator of the RailcoreII CoreXY printer
        https://www.thingiverse.com/thing:2407174

        wilrikerundefined 1 Reply Last reply Reply Quote 0
        • wilrikerundefined
          wilriker @kraegar
          last edited by

          @kraegar said in Duet Web Control 2.0.0-RC2 is ready:

          Not exactly related to the new version, but I'd love to see the ability to move gcode files into sub directories from within the GUI.

          That was possible in DWC1 already. I have not yet tried in DWC2, though.

          Manuel
          Duet 3 6HC (v0.6) with RPi 4B on a custom Cartesian
          with probably always latest firmware/DWC (incl. betas or self-compiled)
          My Tool Collection

          kraegarundefined 1 Reply Last reply Reply Quote 0
          • kraegarundefined
            kraegar @wilriker
            last edited by

            @wilriker How? I can make a folder, but can't figure a way to move a gcode file between folders. Unless I just upload a new copy of them.

            Co-Creator of the RailcoreII CoreXY printer
            https://www.thingiverse.com/thing:2407174

            wilrikerundefined 1 Reply Last reply Reply Quote 0
            • wilrikerundefined
              wilriker @kraegar
              last edited by wilriker

              @kraegar Select them via the checkbox and then drag-n-drop. To get them a folder up use the bread-crumbs above the file list.

              P.S.: Just tested: you don't even have to select them via the checkboxes. Single files can just be drag-n-dropped directly. Use the "link" (that usually opens the wanna-print-this-dialog) as a click-location.

              Manuel
              Duet 3 6HC (v0.6) with RPi 4B on a custom Cartesian
              with probably always latest firmware/DWC (incl. betas or self-compiled)
              My Tool Collection

              kraegarundefined 1 Reply Last reply Reply Quote 0
              • kraegarundefined
                kraegar @wilriker
                last edited by

                @wilriker Hmm. What browser? Isn't working for me in either. I'm on chrome. Could be user error I guess

                Co-Creator of the RailcoreII CoreXY printer
                https://www.thingiverse.com/thing:2407174

                wilrikerundefined 1 Reply Last reply Reply Quote 0
                • wilrikerundefined
                  wilriker @kraegar
                  last edited by

                  @kraegar I use Vivaldi but that is basically a Chrome with a modified UI.

                  Are we both talking about DWC1? Because that's where it works. I just tried and it seems to not be implemented in DWC2 so far.

                  Manuel
                  Duet 3 6HC (v0.6) with RPi 4B on a custom Cartesian
                  with probably always latest firmware/DWC (incl. betas or self-compiled)
                  My Tool Collection

                  1 Reply Last reply Reply Quote 0
                  • kraegarundefined
                    kraegar
                    last edited by

                    Yep. Maybe it's being interefered with by a plugin or something on my side. Going to stop spamming this thread with it.

                    Co-Creator of the RailcoreII CoreXY printer
                    https://www.thingiverse.com/thing:2407174

                    1 Reply Last reply Reply Quote 0
                    • kraegarundefined
                      kraegar
                      last edited by

                      Ok, yep, it works in DWC1, not 2

                      Co-Creator of the RailcoreII CoreXY printer
                      https://www.thingiverse.com/thing:2407174

                      1 Reply Last reply Reply Quote 0
                      • dc42undefined
                        dc42 administrators @sigxcpu
                        last edited by

                        @sigxcpu said in Duet Web Control 2.0.0-RC2 is ready:

                        Then something is broken in backlog implementation because the Nth+1 connection gets TCP RST instead of waiting. Here is how to find out N:

                        I've found a couple of reasons for these issues:

                        1. DuetWiFiServer is coded to reject TCP connections if there are no listeners available for them. There are 4 HTTP responders, so an attempt to open a 5th concurrent HTTP connection is refused. I think this is the right thing to do. With luck, the browser will respect it.

                        2. The main problem I have identified is that DuetWiFiServer is running out of buffer space when returning multiple files concurrently. This results in the connection being aborted. I plan to change the code to buffer outgoing messages in our own code instead of in lwip, so that I can be sure that sufficient memory is available before accepting a message from the Duet.

                        Duet WiFi hardware designer and firmware engineer
                        Please do not ask me for Duet support via PM or email, use the forum
                        http://www.escher3d.com, https://miscsolutions.wordpress.com

                        sigxcpuundefined 1 Reply Last reply Reply Quote 0
                        • sigxcpuundefined
                          sigxcpu @dc42
                          last edited by

                          @dc42 said in Duet Web Control 2.0.0-RC2 is ready:

                          @sigxcpu said in Duet Web Control 2.0.0-RC2 is ready:

                          Then something is broken in backlog implementation because the Nth+1 connection gets TCP RST instead of waiting. Here is how to find out N:

                          I've found a couple of reasons for these issues:

                          1. DuetWiFiServer is coded to reject TCP connections if there are no listeners available for them. There are 4 HTTP responders, so an attempt to open a 5th concurrent HTTP connection is refused. I think this is the right thing to do. With luck, the browser will respect it.

                          2. The main problem I have identified is that DuetWiFiServer is running out of buffer space when returning multiple files concurrently. This results in the connection being aborted. I plan to change the code to buffer outgoing messages in our own code instead of in lwip, so that I can be sure that sufficient memory is available before accepting a message from the Duet.

                          Maybe I don't get this right, but 4 HTTP responders and backlog = 8 means that we can have up to 12 simultaneous connections, 4 accepted, 8 pending. The reset/connection refused should happen on the 13th concurrent attempt.
                          Based on your description (thanks, btw) and my network knowledge, I am pretty sure that the actual backlog is 0 if the 5th connection is refused.

                          1 Reply Last reply Reply Quote 0
                          • percarundefined
                            percar
                            last edited by

                            I have now been using the DWC 2.0.0 R2 for a few days now. I love the format. I also understand that this is a new undertaking and bugs are expected. Please continue in this direction because I feel that the new DWC format will be awesome once the bugs are gone. I ran into very few issues with one being the download time for the Gcodes to be printed. Also there have been a few disconnects which I have not really investigated the reason behind the disconnects. I am sure as time progresses this will all be sorted out. Again Thanks

                            1 Reply Last reply Reply Quote 0
                            • gtj0undefined
                              gtj0
                              last edited by

                              I have to say... I'm not a fan. Sorry.

                              Non sales/marketing users interfaces need to be designed for people who are going to be sitting in front of it and using it for 8 hours a day. Here are some things I'd like to see...

                              Get rid of the spacing in the left menu, then you don't need the major items to collapse. Keep it compact so everything you need is in the smallest space that's still usable.

                              The temperature plots are nice but I'd rather see a grid of my macros in that spot. Maybe you could keep the plots if the spacing in the other widgets were reduced.

                              When you scroll, the menu and top widgets should be pinned. For instance, when you're looking at the macros or system files, the only thing that should scroll is the list of files themselves. Even the list column headers and upload buttons should be fixed.

                              For devices with 3 movement axes and 1 or more extruders, the movement buttons should be laid out in a cross pattern. Vertical row for Y, horizontal row for X, then to the side, a vertical row for Z and each extruder.

                              These may be in the works but...
                              The height map display doesn't show the statistical analysis so if you look at it later you don't know the magnitude of the colors.

                              There's no display of system information.

                              1 Reply Last reply Reply Quote 0
                              • 3dmntbighkerundefined
                                3dmntbighker
                                last edited by

                                How do I change the default fan from "Tool Fan" to "Fan 0"? I can't even hide Tool Fan, but I have to keep manually showing Fan 0, which is the tool fan.

                                Scratch built CoreXY with Maestro
                                Heavily modified Ender 3 with Maestro
                                MPCNC work in progress with Duet WiFi

                                1 Reply Last reply Reply Quote 0
                                • kazolarundefined
                                  kazolar
                                  last edited by

                                  Maybe this was answered, but where is the diagnostics page in the new UI. I can't find drives/current/end stop status screen.

                                  wilrikerundefined 1 Reply Last reply Reply Quote 0
                                  • wilrikerundefined
                                    wilriker @kazolar
                                    last edited by

                                    @kazolar I don't think this is there, yet.

                                    Manuel
                                    Duet 3 6HC (v0.6) with RPi 4B on a custom Cartesian
                                    with probably always latest firmware/DWC (incl. betas or self-compiled)
                                    My Tool Collection

                                    kazolarundefined 1 Reply Last reply Reply Quote 0
                                    • r123undefined
                                      r123
                                      last edited by r123

                                      Have not yet installed this. But would love to see a screenshot from someone who has so as to understand better what everyone's talking about! 😉

                                      1 Reply Last reply Reply Quote 0
                                      • kazolarundefined
                                        kazolar @wilriker
                                        last edited by

                                        @wilriker ended up reverting the firmware to the previous RC build -- which removed the DWC upgrade, oh well...seems a bit raw as of now.

                                        1 Reply Last reply Reply Quote 0
                                        • patakopecekundefined
                                          patakopecek
                                          last edited by

                                          idk why but when I try to load code files my browser hangs, it just freezes

                                          1 Reply Last reply Reply Quote 0
                                          • patakopecekundefined
                                            patakopecek
                                            last edited by

                                            And I am unable to upload .bin files, which are essential for fw updating, until @dc42 starts packing his .zip with DWC2, and for some reason when I just removed the dwc1 files from the zip it would not let me update, it said that this package is not compatible with my electronics, I know it is because when I moved it to the sd card manually it worked like a charm

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA