Web control gcode list

tierod

Hi all, I’m having issues with web control gcode directory. It’s been this way since loaded. It’s completely full with one gcode. I can’t delete them either. I tried making another directory, it made one alright, and then continued to fill the whole thing with the same directory, 100’s of them, page after page after page. I have firmware 1.19.2, wifi 1.23, web interface 1.22.6. Thanks for any help
Rod

Phaedrux

@tierod said in Web control gcode list:

I have firmware 1.19.2

I think your firmware is drastically out of date for the web interface version you are running. I suggest you go through the process of updating the firmware.

https://duet3d.dozuki.com/Wiki/Installing_and_Updating_Firmware

tierod

Thanks for the reply, so I’ve tried to upload duet2combinedfirmware 2.03 from dc42 github via webcontrol upload bar. It says uploading complete do you want to update firmware, I say yes and then it says Duetwifi firmware bin not found
I double clicked on version 2.03 on github which sends the file to my download folder. Iam I not doing it right.

tierod

An update, now it appears in config as Duetwifi combined firmware.bin but I can’t do anything with it. Still have pop up box saying can’t be found

Phaedrux

~~See this sectionhttps://duet3d.dozuki.com/Wiki/Installing_and_Updating_Firmware#Section_Upgrading_a_Duet_2_Wifi_to_firmware_1_19_or_later_from_1_18_2_or_earlier~~

See @dc42 response below.

tierod

Thanks phaedrux, somehow missed that. I’ll try that tomorrow,thanks
Rod

dc42

I think the section you actually want is this one https://duet3d.dozuki.com/Wiki/Installing_and_Updating_Firmware#Section_Upgrading_a_Duet_2_WiFi_or_Ethernet_to_firmware_1_21_or_later_from_1_20_or_earlier.

tierod

Dc 42
Thank you very much, that was it!
Had to download iap4e.bin as well.
All done!
Thanks guys
Rod