M558 parameter K not documented in the manual
-
I think the g code manual here:
https://duet3d.dozuki.com/Wiki/Gcode#Section_M558_Set_Z_probe_type
is missing the K parameter referred to here:
https://duet3d.dozuki.com/Wiki/RepRapFirmware_3_overview#Section_M558(it made reading the probing instructions manual very disconcerting)
-
the first link refers to RRF v2 and the last to v3 which is still in development albeit nearing the first stable release
-
do you have an equivalent of the first link for RFF3?
-
The second link, in its entirety outlines the differences between RRF2 and RRF3. So unless mentioned what is valid for RRF2 should also be valid for RRF3.
-
@bearer @nraynaud I updated the gcode dictionary with the information from the RRF_3 page in October, but M558 seems to have been missed. I'll update it. Let me know if there's any others!
Ian
-
thanks, I have not encountered any other missing parameter.
