RRF3.0 & z-probe

[ludisnet]

Hi,

After switching to RRF3.0, I can no longer do automatic G32 calibration:

1/ the z-probe measurement is no longer on the web interface ( => it can be displayed with the parameter "return to DWC1")
2/ when I launch G32 , it launches a "manual" z-probe, and not automatic !

My config in config.g :
;
; ***** Z probe and compensation definition *****
M558 P1 F100 T3000 X0 Y0 Z0 H4 ; Z probe is a Smart Effector
G31 P500 X0 Y0 Z1.80 ; Set the zprobe height and threshold for Smart Effector
M557 R85 S20 ; define mesh grid
;

My config in bed.g :
M561 ; clear any bed transform, otherwise homing may be at the wrong height
G28
G30 P0 X0.00 Y80.00 Z-99999 H0
.......................
G30 P15 X0 Y0 Z-99999 S6
;
G1 X0 Y0 Z150 F6000 ; get the head out of the way of the bed
;
M500 ;
G29

Anything changed about the G32 calibration?

Thanks.

Ludis

[dc42]

@ludisnet said in RRF3.0 & z-probe:

M558 P1 F100 T3000 X0 Y0 Z0 H4 ; Z probe is a Smart Effector

Add the pin name of the Z probe to the M558 command. Also you should use P8 for Smart Effector, not P1, and a higher probing speed. This is what I use on my delta, with Duet WiFi with RRF 3.01beta1:

M558 P8 C"zprobe.in+zprobe.mod" H4 F1000 T12000 R0.2 S0.02 A5
G31 X0 Y0 Z-0.10 P100

[ludisnet]

@dc42 : Thanks, G32 work well now.

Now, I wanted to make a G29 (I discover...), and after launching G29, in the middle of the bed, it displays an error:
"
G29
Error: Z probe already triggered before probing move started
"

Do you know why?

my parameter in config.g :
M557 R85 S20 ; define mesh grid

In the GUI, the M557 setting parameters (...define zone) do not take over the values from config.g ...what to do?

Thank you.

PS : delta, with bed radius ~100cm

[ludisnet]

so, i reduce speed (z-probe), and work without error ....
with :
M558 P8 C"zprobe.in+zprobe.mod" H4 F500 T8000 ; R0.2 S0.02 A5

Ludis

[dc42]

@ludisnet said in RRF3.0 & z-probe:

so, i reduce speed (z-probe), and work without error ....
with :
M558 P8 C"zprobe.in+zprobe.mod" H4 F500 T8000 ; R0.2 S0.02 A5

Ludis

You could increase the R parameter, to allow the effector more time to settle before probing starts.