Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Cannot install RRF3.01 RC on DuetWifi: "File is too big"

    Scheduled Pinned Locked Moved Solved
    Beta Firmware
    1
    2
    283
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • resamundefined
      resam
      last edited by resam

      I'm trying to install any of the RRF3.01 RC* firmwares on my DuetWifi 1.04.
      I'm currently running 2.05.1 - which installed without problems.

      However, when I try to run M997 S0 the PanelDue shows this error message for a split second - before the printer resets:

      ERROR: File 0:/sys/Duet2CombinedFirmware.bin is too big

      I see that my 2.05.1 firmware bin file is around 402KB, whereas the 3.01RC10 is 489 KB.
      Is the DuetWifi board no longer supported, or do you expect that the final release version will fit again onto the Duet2-series boards?

      1 Reply Last reply Reply Quote 0
      • resamundefined
        resam
        last edited by

        Ah, nevermind - should have searched a bit harder on the wiki:
        https://duet3d.dozuki.com/Wiki/Installing_and_Updating_Firmware#Section_Upgrading_a_Duet_WiFi_Ethernet_Maestro_from_firmware_2_x_to_3_01_or_later

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA