Duet Web Control 2.1.6

[Lc1975]

Hello... Again..

After updating to the last version of Firmware and DWC when homing the Z i have this:

I update the Maestro bin file, then the DWC zip folder
No error appears..

Regards

[dc42]

Send M558 and see what Z probe type it reports.

[Lc1975]

With version 2.1.6

M558
Z Probe 0: type 0, dive height 5.0mm, probe speed 50mm/min, travel speed 6000mm/min, recovery time 2.00 sec, heaters normal, max taps 1, max diff 0.08

version 2.1.5
m558
Z Probe 0: type 0, dive height 5.0mm, probe speed 50mm/min, travel speed 6000mm/min, recovery time 2.00 sec, heaters normal, max taps 1, max diff 0.08

The problem is that the numbers disappear in the bar...

[dc42]

Does it work properly with DWC 2.1.5 ?

[Lc1975]

Yes.
No problem with DWC 2.1.5

[dc42]

Thanks, I'll refer this to @chrishamm to fix.

[Lc1975]

Thank you.

[chrishamm]

Thanks for reporting this, I'll fix it in DWC 2.1.7.