3.01-RC12 (2020-05-06b1) DWC 2.1.7 wrong values Temperature MCU

Lc1975 · 9 May 2020, 23:22

Hello again....

After instaling with now issue the last version of firmware and the DWC
i have this showing:

The temperature of MCU is around 48ºC and when i put the mouse on top only shows maximum of 28ºC ...

Not normal... I think...

Regards

DaveA · 10 May 2020, 15:35

I just noticed the same issue with RC12 and DWC 2.1.7 on a duet Maestro.
I am currently showing 41.9 degrees but hovering over the value I see a minimum of 19.8 and a maximum of 24.9.