Endless messages after print pause
-
I get these endless message popups once i resume my print after adding a pause in (done use the pause functionality in PrusaSlicer) what am i doing wrong or is it a bug?
M117 "Place magnet in slots and resume printing" M601
-
What versions of RRF and DWC are you using?
-
Firmware Name: RepRapFirmware for Duet 2 Maestro
Firmware Electronics: Duet Maestro 1.0
Firmware Version: 3.1.1 (2020-05-19b2)
Web Interface Version: 1.22.6 -
@Slzer said in Endless messages after print pause:
Web Interface Version: 1.22.6
Update your DWC version to 3.1.1
Upload this zip file as is to the /sys folder in DWC.
https://github.com/Duet3D/RepRapFirmware/releases/download/3.1.1/DuetWebControl-SD-3.1.1.zip
-
Hmm - no idea why i had such an old web version! Looks way nicer now about to try a print with a pause to see if it fixed the issue!
-
It fixed it
cheers!
