Mini bug beta 3.2.2 12864 fysetc

[seraser]

Hello.

If I first navigate from sdcard0 or sdcard1 without choose any file and back to move section for homming duetwifi restart.

[dc42]

Which Duet? With or without attached SBC?

Hint: if you post the full M122 report, it includes this information.

[seraser]

@dc42 duetwifi, without sbc

[dc42]

Thanks. Are you selecting the second SD card on the 12864 display? If so, please provide your menu files.

[seraser]

@dc42 choose sdcard0 or sdcard1 and same happens.

I cant upload here so...

https://gofile.io/d/xvvqE3

Thank you

[dc42]

@seraser, I'm sorry for the delay in replying. The problem is that there is insufficient RAM to run the 12864 menu system on the Duet WiFi. I have a solution planned for this.

[seraser]

@dc42 no problem, I know you are bussy and the delay is good for me because I learn to compile the firmware with less motors active, see the final of this topic:

https://forum.duet3d.com/topic/19980/little-help-to-build-rrf3/11

Thank you very much.