Strange behavior with CAN-bus

medicusdkfz · 27 Nov 2020, 09:53

Hi,

I get a strange message, that I hadn't before
:

I installed the latest beta4 for RRF3.

Kindly regards,
Pierre

medicusdkfz · 27 Nov 2020, 09:55

Oh sorry! My boards are a 6HC and a 3HB...

dc42 · 27 Nov 2020, 10:06

Reboot the main board if you haven't done so since the expansion board firmware was updated, and use M115 and M115 B1 to check what firmware versions are installed.

medicusdkfz · 27 Nov 2020, 10:41

@dc42 said in Strange behavior with CAN-bus:

M115

Can't install the new 3HB-firmware... Have 3.0RC1 (M115 B1) after uploading the file from the release 3.2 beta4 (Duet3Firmware_EXP3HC) to the system folder...

M115 showed the 3.2beta4 for the 6HC...

dc42 · 27 Nov 2020, 10:42

Are you running with or without attached SBC?

medicusdkfz · 27 Nov 2020, 10:44

standalone 6HC

medicusdkfz · 27 Nov 2020, 10:59

The 3.2Beta4 from 6HC starts immediately with flashing the EEPROM after uploading but not the 3HC... The same issue, when I downgrade to 3.2beta2.2... Do I need other files for the flashing of the 3HC inside the system folder?

These files are inside:

medicusdkfz · 27 Nov 2020, 11:24

Problem solved. I have forgotten M997 B1... Now it's working!

dc42 · 27 Nov 2020, 12:58

Thanks, I'll mark this as solved.