looking for latest firmware . been out of loop a while .
-
looking for the latest firmware for my machine . been out of the loop a few years .
-
-
Here's a post I wrote for someone upgrading from 1.20 as well. It may serve you well.
https://forum.duet3d.com/topic/19305/duet-2-wifi-with-gigabot-thermocouple-issue/4?_=1607311861434
-
@gurusonwheels Firmware 2.05.1 is the latest for the 1.xx firmware. Also, read all the what's new readme files for all versions since 1.2 for any changes you need.
See page two of https://github.com/Duet3D/RepRapFirmware/releases?after=3.01-RC11 to get 2.05.1
To use 3.xx you have to change the config.g. It changed how the pins are defined.
To help making the config.g file see: https://configtool.reprapfirmware.org/Start
-
post your original config.g here.
then start entering the details in the configurator and generate a new config.
then post that here so we can check for you
