Gcode postproces with fusion 360

Svenvdb

What postprocessor do you guys use for a CNC with a duet 2 wifi?

I tried multiple ones like:
Workbee
RS-274
Mach2
Mach3

They all don't work with the duet 2. Like when I send it to the machine it just goes to the home position.
I hope someone can help me with it.

JohnRov

Hi,
Not sure if this will help you. Im running a Duet 3 6HC with a raspberry pi3b+. My cnc is an Openbuilds Lead 1010 with high z mode.
I use the Ooznest post processor for fusion-360 as the Workbee lead screw cnc is practically the same. Ive loaded the post processor into my Fusion 360 Library> Assets> CAMPost.

Fusion-v1.0.1
https://ooznest.co.uk/wp-content/uploads/2019/02/Fusion-v1.0.1.zip

Im still pretty new to cnc, Duet controllers and RepRap firmware so i cant say how perfect it runs but it works well on the jobs ive done already.

Firky_CNC

Hello,

I use the Reprap post processor. its an option from fusion 360. this allows me to use the M3 and M7 for spindle and mist cooling.

Good luck.