Duet 2 Wifi not connecting to Apple Router Wifi Network

[Jordan_Miller41]

Hello all,

Banging my head against a wall trying to figure out what I am doing wrong here. Long story short I switched internet providers, I am now using my own router system for the LAN and WLAN (Apple Airport Extreme and Express), yes I know they are horrid and old, but I do not have the money to spend on a new setup at the moment.

Anyhow I am having a real bear of a time getting my Duet 2 on my Rostock MaxV4 to connect to the network. I got my OctoPi to do so with ease. But I do not understand why the duet will not work.

I get the message of "invalid ssid" or "MillerWiFi IP=0.0.0.0, ..... " when running the Network Macro and then sends error messages and won't connect. I've tried everything I can think of, but with no success.

Is there something in my "Network" macro that I can add to query the Apple router for an IP? I have the SSID and password correctly written into the macro but it just will not connect at all.

Thank you in advance.

Jordan

[droftarts]

@Jordan_Miller41 Please post your network macro (obfuscate your password), and response to M122 (for firmware and WiFi firmware versions).

Have you tried the USB connection setup method from https://duet3d.dozuki.com/Guide/1.)+Getting+Connected+to+your+Duet/7?lang=en#s9 ?
Usually, I find it more reliable to turn off WiFi with M552 S-1, then turn it on in idle mode with M552 S0 before adding SSID, if there's no existing WiFi connection. Then send M552 S1 to enable WiFi.

Ian

[Jordan_Miller41]

Just tried the guide you sent, you can see the response I get.

My SSID is "MillerWiFi" and then the password.

Here is the Network Macro screenshot.

SOLVED:

So in the above picture I have "MillerWifi" which should've been "MillerWiFi", so I ran the macro twice and somehow it connected, although I swear I had it right before.

Thank you for your help though, I appreciate it .