Setting Machine Movement Increments
-
There is probably a simple answer to this but I cant seem to find it simple enough! I would like to change the Machine Movement increments on the Z access from 0.05 to 0.02. Thanks!
-
Right click the amounts.
-
No way. Its so easy I feel like an idiot for overthinking it. I edited the DWC2settings.jason lmao. thanks man!
-
@LeckieTech there’s also a DWC manual that shows it: https://duet3d.dozuki.com/Wiki/Duet_Web_Control_v2_and_v3_(DWC)_Manual#Section_Adjusting_movement_amounts
Ian
