Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Duet wifi 2 connection issue

    Scheduled Pinned Locked Moved
    Using Duet Controllers
    2
    2
    97
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • ncundefined
      nc
      last edited by

      I connected my duet 2 wifi to my network and was able to access DWC while it was powered over usb. I then connected my 3d printer hardware and my duet would no longer connect to my network. I tried forgetting and re entering my network credentials but the board won't reconnect and the wifi led flashes. Any idea why this is?

      1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator
        last edited by

        When you are connected to VIN, also connect via USB so you can send terminal commands and see what is happening. Be careful when connecting via USB while also connecting via VIN though to avoid USB ground loops. Use a laptop on battery power to be safe, or at least ensure that the PC and printer are on the same outlet.

        From the terminal send M552 and see what it responds with.

        Cycle through the network commands and see what it says for each.

        M552 S-1

        M552 S0

        M552 S1

        M587

        Z-Bot CoreXY Build | Thingiverse Profile

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA