No wifi en errors after update 1.19

Nengerman · 16 Aug 2017, 20:05

Update via Usual procedure wifi failed.
No connection more with wifi

Fallback procedure #1
• If WiFi is not working, but you can connect to the board via USB/Pronterface:
• Take the on-board SD card out and put it in a computer,
• Copy the new DuetWiFiFirmware.bin file to the /sys folder. It must be called exactly DuetWiFiFirmware.bin on the SD card. Also make sure that file iap4e.bin is present in /sys.
• Replace the on-board SD card in the DuetWiFi
• Restart the DuetWiFi and connect with Pronterface
• Send command M997 S0 to install the firmware.
• Disconnect Pronterface, then when the USB port disappears and reappears about 20 seconds later, reconnect.

Connecting…
Printer is now online.

M997 S0
SENDING:M997 S0
[ERROR] Can't write to printer (disconnected?) (SerialException): Write timeout
[ERROR] Can't read from printer (disconnected?) (SerialException): call to ClearCommError failed
[ERROR] Can't write to printer (disconnected?) (SerialException): WriteFile failed ([Error 22] Het apparaat herkent de opdracht niet.)
After that, the DuetWiFiFirmware.bin of the SD card has been removed.

m115
SENDING:M115
FIRMWARE_NAME: RepRapFirmware for Duet WiFi FIRMWARE_VERSION: 1.19 ELECTRONICS: Duet WiFi 1.0 FIRMWARE_DATE: 2017-08-14

And if I move the X and Y axis in Pronterface I get this error message

Connecting…
Printer is now online.
[ERROR] Traceback (most recent call last):
File "printrun\printcore.pyc", line 241, in _readline
File "printrun\pronterface.pyc", line 1713, in recvcb
File "printrun\pronterface.pyc", line 1669, in update_pos
ValueError: could not convert string to float:

[ERROR] Traceback (most recent call last):
File "printrun\printcore.pyc", line 241, in _readline
File "printrun\pronterface.pyc", line 1713, in recvcb
File "printrun\pronterface.pyc", line 1669, in update_pos
ValueError: could not convert string to float:

[ERROR] Can't read from printer (disconnected?) (SerialException): call to ClearCommError failed
[ERROR] Can't write to printer (disconnected?) (SerialException): WriteFile failed ([Error 22] Het apparaat herkent de opdracht niet.)
[ERROR] Can't write to printer (disconnected?) (SerialException): WriteFile failed ([Error 22] Het apparaat herkent de opdracht niet.)

How can I solve this

dc42 · 16 Aug 2017, 21:13

Did you read and follow the instructions prefaced IMPORTANT! on the download page when you updated the firmware?

Nengerman · 17 Aug 2017, 06:36

If you mean this page, yes

https://duet3d.com/wiki/Updating_main_firmware

Dougal1957 · 17 Aug 2017, 06:40

no not that page at all this is the one you want https://github.com/dc42/RepRapFirmware/blob/dev/WHATS_NEW.md

Read it all carefully

Nengerman · 17 Aug 2017, 06:41

Can I try the Fallback procedure # 3

dc42 · 17 Aug 2017, 14:12

If you have already installed main firmware 1.19 successfully, you don't needs to use the fallback procedure. Just copy the DuetWiFiServer-1.19.bin to /sys on the SD card and rename it to DuetWiFiServer.bin. Also create a /www folder on the SD card and extract the DuetWebControl files to /www on the SD card and described at https://duet3d.com/wiki/Upgrading_to_DuetWiFiFirmware_1.19. Then pop the SD card back in the Duet, restart it, send M997 S1 to install the wifi firmware, and proceed with the instructions for configuring your access point details.

Nengerman · 17 Aug 2017, 18:48

It worked. It works.
Only confusing that there are several manuals for update firmware on the internet

Thank you for the assistance.